Analysis of Parameters for Vehicles M2 and M3 Category – Case Study Republic of Croatia
Julijan Jurak
University of Zagreb, Faculty of Transport and Traffic Sciences
Marko Slavulj
University of Zagreb, Faculty of Transport and Traffic Sciences
Marko Emanović
Center for Vehicles of Croatia (CVH)
Matija Sikirić
University of Zagreb, Faculty of Transport and Traffic Sciences
DOI: https://doi.org/10.7307/ptsm.2020.4
Key words:
buses, age of buses, number of buses, influence
Abstract
Vehicles category can be separated into two main categories, M and N category.
M categories represent motor vehicles which are used for passenger transport, and
N category is used for freight transport. This paper will present one sub-category
of M category (M2 and M3 category). M2 and M3 categories are motor vehicles
which have more than 8 passenger seats (without seat for driver), also known as
buses. Aim of paper is detect what parameters of buses influence on different
variables, mainly considering ages and number of vehicles in Croatia and other
countries. The paper consists of introduction, overview of vehicles category in the
Republic of Croatia regarding to age, discussion, and conclusion.
References
Bošković. I., “Tehnički pregledi vozila iz perspektive pravila o tržišnom natjecanju”, ZPR 4, vol. 2, no.
2015, pp. 171-205
Hrvatski Autoklub, https://www.hak.hr/vozila/tehnicki-pregledi/popis-stp/, [accessed: november 2020.]
Center for Vehicles of Croatia, https://www.cvh.hr/tehnicki-pregled/stanice-za-tehnicki-pregled/,
[accessed: november 2020.]
ACEA European Automobile Manufacturers Association. ACEA Report Vehicles in use Europe 2019.
ACEA. Brussels. 2019
